• Home
  • >
  • 판매상품
    판매상품
    Product Sales
  • Multitask Platform JM-10/JM-20
    (이형 부품 자동 삽입기)
  • 한국소니전자와 JUKI사가 상호 신뢰, 협력하여 SMT 산업에서 혁신적으로 수삽공정을 자동화 할 수 있는 이형부품 자동삽입기(MI)를 고객의 특성과 요구에 적합한 맞춤형 장비를 개발, 판매, 공급함으로써 고객의 품질확보 및 사업 성장에 기여하고 있습니다.
    • 레이저 일체형 헤드에서 부품을 360도 회전시키면서, 레이저 광으로 부품 리드의 끝을 인식하고, 부품의 센터링 및 장착 각도를 보정하므로 정확한 부품 삽입이 가능.

  • 부품인식 본체 인식 결과 리드 인식 결과 인식 이미지
    • - Specificationen
      Placement head
      Multi nozzle laser head (6 nozzles)

      Placement rate SMT (max.)
      17,500 cph laser centering (optimum)
      12,500 cph laser centering of SMT components (IPC 9850)
      4,100 cph vision centering

      Placement rate THT (max.)
      0.8 s/comp. (vacuum)
      1.3 s/comp. (gripper)

      Component range
      0201 - 33.5 x 33.5 mm
      Component height (max.)
      28 mm

      Placement accuracy
      ±50 μm (Cpk ≥ 1) laser centering
      ±40 μm (Cpk ≥ 1) vision centering

      Board dimension (max.)
      410 x 250 mm
  • JM-10 동영상
    • Feeding method:
      Presented tray

      Number of trays:
      max. 40 (TR-5SN)
      max. 40
      or 2 x 20 in non-stop mode (TR5DN)

      Tray size:
      max. 340 x 230 x 23 mm
      min. 150 x 90 x 5 mm

      Weight / Tray:
      max. 500 g

      Bauteilgrössen:
      All components the assembler can handle

      Occupied positions:
      Complete rear bank

      Component feeding by matrix tray
      The TR-5 is installed on the rear bank of the assembly machine and presents trays to the machine one at a time so that the placement head can pick components directly from the trays.

      All components, especially odd forms, can be presented using this type tray changer/holder.
  • JM-20 동영상
  • 지원 Feeder
    Stick Feeder, Radial Feeder, Axial Feeder, Tape Feeder, Tray Server, 벌크 부품Feeder 등 다양한 Feeder를 선택하여 사용할 수 있습니다.
  • Matrix tray modules

    • Feeding method:
      Fixed trays

      Applicable tray size:
      322 x 270 x 28 mm (full type)
      160 x 270 x 28 mm (half type)

      Component size:
      All components, the assembler can handle

      Occupied positions:
      20 8 mm feeders (full type)
      10 8 mm feeders (half type)
  • TR-5

    • Feeding method:
      Presented tray

      Number of trays:
      max. 40 (TR-5SN)
      max. 40
      or 2 x 20 in non-stop mode (TR5DN)

      Tray size:
      max. 340 x 230 x 23 mm
      min. 150 x 90 x 5 mm

      Weight / Tray:
      max. 500 g

      Bauteilgrössen:
      All components the assembler can handle

      Occupied positions:
      Complete rear bank

      Component feeding by matrix tray
      The TR-5 is installed on the rear bank of the assembly machine and presents trays to the machine one at a time so that the placement head can pick components directly from the trays.

      All components, especially odd forms, can be presented using this type tray changer/holder.
  • TR-7

    • Feeding method:
      Presented tray

      Number of trays:
      TR-7DN: max. 40
      or 2 x 20 in non-stop mode

      Tray size:
      max. 340 x 230 x 23 mm
      min. 150 x 90 x 5 mm

      Weight / Tray:
      max. 500 g

      Component size:
      All components the mounter can handle

      Occupied positions:
      Complete rear bank

      Component feeding by matrix tray
      The TR-7 is installed on the rear bank of the assembly machine and presents trays to the machine one at a time so that the placement head can pick components directly from the trays. All components, especially odd form, can be presented using this type of tray changer/holder.
    • 영업 판매 안내

      빠르고 정확한 상담을 도와드리겠습니다.

      전화 : 055-250-0661,0605,0610
      메일 : NBGP.SEK@ap.sony.com